Hello!Welcome to Hubei BlueSky New Material INC.!
English | 中文版

【International Sales Office】
  Address:Room 2401,Tower B, Winner Plaza, No.100 Huangpudadao West Road, Tianhe District, Guangzhou,China
  Tel:+86-020-38856806
  Fax:+86-020-38856809
  E-mail:feng@blueskychemical.com

【Chinese Company Headquarters】
  Address:NO.8 Chemical Industry Park Economic Development Zone Xiantao,Hubei,China
  Tel:+86-0728-3254088
  Fax:+86-0728-3253808
  E-mail:feng@blueskychemical.com

·POSITION:ProductsGroupOthers → METHYL TRI ACETOXY SILANE

METHYL TRI ACETOXY SILANE

METHYL TRI  ACETOXY SILANE
  • Product Code:D-14
  • CAS No.:
  • Effective Content:≥90.0%
  • Appearance:Colorless or yellowish transparent liquid
  • Packaging:PAIL/DRUM/IBC
  • Net Weight:25KG/200KG/1000KG
Product Description

Product Information

Chemical Name: METHYL TRI ACETOXY SILANE

Product Code: D-14


Properties

D-14 is a low viscosity liquid with a pungent odor, colorless to light yellow transparent,The crystallization point is low, liquid above 5 ℃,


Technical Data

1.png

Note: the above data is for reference only, cannot be as a technical specification. 


Reactivity

D-14 readily hydrolyzes upon contact with moisture.Hydrolyzed with water without catalyst at room temperature. The hydrolysis activity is lower than D-10.


Application  


Crosslinker for RTV-1 acetoxy sealant.

D-14 is the main crosslinking agent for RTV-1 acetoxy sealant, which can be used alone or mixed with other acyloxy silanes to achieve the required performance and curing rate. The addition amount of D-14 is approximately 3-5%.

D-14 is usually used alone or mixed with other acidic crosslinking agents, which can provide better tensile strength and better adhesion. If mixed with D-14 and D-12, lower crystallization points can be achieved and higher performance and RTV-1 acetoxy sealant can be obtained.

The preparation process is the same as traditional acidic crosslinking agents. The first step is to mix the polymer with silicone oil for defoaming, followed by the addition of cross-linking agent D-14. After stirring for about 15 minutes, fillers such as gas-phase white carbon black are added, and after dispersion, catalyst D-70 is finally added.


【Statement:】
  This product information, as well as all technical advice, is based on our current level of experience and knowledge. We do not accept any legal responsibility, including the known third party intellectual property rights. In particular, we do not make any guarantee or warranty of the product properties in a legal sense. We reserve the right to any changes to this product made by technological progress or further development. Customers who use this product should conduct their own careful testing and inspecting. This description of the product properties should also be verified by professional testing through the customers who use this product. The reference codes of other companies are not recommended but not excluded the availability of similar products.
  The guarantee from Hubei BlueSky is that the products ex BlueSky meets the sales specifications.
  The remediation for the breach of the warranty from Hubei BlueSky is limited to refund the payment or the replacement of product that does not subject to the warranty.

Wechat

Wechat

Website

Website


Copyright © 2023 Hubei BlueSky New Material INC.
鄂ICP备05028071号 鄂公网安备 42900402000406号 网络经济主体信息湖北工商网监

 Home  Tel  Product
Trade
Hotline
+86-020-38856806
Head
Hotline
+86-020-38856809
WeiXin
Code
Wechat

Wechat

^
TOP